Your first spoof
Choosing a load method, the reboot, and how to confirm your serials actually changed.
Before you start
Run through this once. Skipping it is what turns a two-minute job into an evening.
- Your machine is prepared for the load method you intend to pick.
- Your licence key is redeemed and your account shows time remaining.
- Your antivirus has an exclusion for the loader folder.
- Your game, launcher and anticheat are fully closed, not just minimised.
- Anything private is closed. The loader may capture a screenshot for abuse checks.
If you have already spoofed since your last restart, restart again before continuing. The loader itself says so: If you're already spoofed, please reboot your computer and try again. One spoof per boot.
Choose a load method
After you sign in, the loader shows Select a load method. This is the screen that decides everything else, and it lists each requirement with a live indicator so you can see which one is still wrong before you commit.
| Method | How it loads | Pick it if |
|---|---|---|
| Standard | Loads a signed driver, then our modules through it. | |
| Intel | Interposes in the boot process, then loads via virtualization. |
The loader describes the first as the default and most widely compatible, and the second as the newer and more secure but less compatible option. Pick the one your machine is actually prepared for. Choosing the other simply stops with a requirements message; nothing breaks.
You may also be asked to select a build. That is which spoofer build to run, and is separate from the load method. Take the default unless support told you otherwise.
Run the loader
-
1
Open it as administrator
Right click the loader and choose Run as administrator. It needs to elevate to touch firmware and drivers, and will fail early without it.
-
2
Sign in
Use the same account you redeemed your key on. The loader checks your licence and reports your machine to us at this point.
-
3
Pick your load method
As above. The loader then verifies your firmware settings and tells you exactly which requirement is unmet if any are.
-
4
Pick a seed
Select a saved seed if you want the same fake machine you used last time, or create a new one for a fresh identity. How seeds work.
-
5
Start the spoof
Press the button and leave the machine alone until it finishes. Do not open other applications while it runs.
Reboot
Use Restart rather than Shut down, because Fast Startup can leave the previous session partly intact.
The very first time you use this method, the loader installs itself and then reboots your computer to complete the setup. You must launch the loader again after that reboot to actually spoof. The loader tells you as much: Please reboot your computer and run this software again.
During that first reboot the bootloader enrols its own Secure Boot keys, so your firmware may show an extra prompt. Accept it. Afterwards Windows reports Secure Boot as on again.
Once installed, the Intel Edition follows the same rules as the standard build, including one spoof per boot.
Check it worked
Confirm your serials actually changed before you launch anything that checks them.
Get-CimInstance Win32_DiskDrive | Select-Object Model, SerialNumber
Get-CimInstance Win32_BaseBoard | Select-Object Manufacturer, SerialNumberCompare those values against what you saw before spoofing. They should be different, and they should look like plausible manufacturer serials rather than obvious junk.
Your dashboard also records each sign-in with the hardware the loader reported, so you can open the latest entry and confirm we saw the spoofed values too.
The usual causes are a preparation step that did not stick, or a second spoof in the same boot. Restart, verify your settings on your method's preparation page, and try once more. If it still does not take, see troubleshooting.
Then start your game
Launch your game only after the reboot and only after you have confirmed the spoof applied. Starting it beforehand means it reads your real identifiers and caches them, which defeats the point.
Your machine stays spoofed until you reboot. Next session the whole loop is: restart, open the loader, pick your method and seed, spoof, reboot, play.
To skip typing your details each time, start the loader from a shortcut that signs you in, or even starts the spoof for you. See launch options.
This page did not solve it? Ask our staff on Discord.
